CompuSTAR 1W900SHR-961 Manual de instalación descargar pdf (Pagina 23)

CM4300 Wiring Description

Connector 1 (CN1), 4-Pin

Pin 1 Red

- Constant 12V positive (+) power input. This wire must be connected. The proper vehicle

wire will test (+) 12V at all times - while the key is in the off position, the on position and during

crank.

Pin 2 Green/White

– This is a dual-purpose wire that features selectable functionality thru the

trunk/light jumper on the control module. It is either a positive (+) parking light output or positive

(+) trunk output.

Default - Parking light positive (+) output. The proper vehicle wire will test (+) 12V when the

parking light switch is in the on position.

Optional – Trunk release positive (+) output. The proper vehicle wire will test (+) 12V when the

trunk release is triggered.

Pin 3 Brown

- Siren 12V positive (+) output. Connect this wire to the (+) wire located on the siren. To

change siren output settings, review Option 3-7.

Pin 4 Black

- Ground negative (-) input. This wire must be connected to the vehicles ground.

Connector 2 (CN2), 2-Pin: Optional Battery Back-up

Pin 1 Red

- Constant 12 V positive (+) input and charging output for a back-up battery.

Pin 2 Black

- Ground (-) negative input for back-up battery.

Connector 3 (CN3), 18-Pin: Programmable Output Connector (POC)

IMPORTANT: Odd Pin numbers 1 through 11 are programmable for up to 12 different output types.

Refer to Special Option Group 2 for complete details (pages 32 & 36).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Sin comentarios

CompuSTAR 1W900SHR-961 Manual de instalación Pagina 23