CompuSTAR 1WAMR-Fiance Manual de usuario descargar pdf (Pagina 9)

By Firstech, LLC 16 17 By Firstech, LLC

a@iM

Remote LCD(liquid crystal display) Diagram and lcons

Passive Mode

This icon will be displayed if Passive mode is currently active. Passive mode will automatically arm the system 30 seconds after the

last door is closed or 30 seconds after the system was disarmed if no door was opened. This mode is ignored while the ignition is on

with the key.

Drive Lock

This icon will be displayed if Drive Lock mode is currently active. Drive Lock mode will lock the doors automatically if the ignition is

on and the brake is pressed or if the ignition is on and the engine exceeds the idle RPM multiplied by 2, depending on the options

set by the installer. The doors will be unlocked when the ignition is turned off. In a manual transmission vehicle the doors will

unlock when the emergency brake is set.

Turbo Mode

This icon will be displayed if Turbo mode is currently active. While Turbo mode is active, the vehicle will remain running for a

preset time after the emergency brake has been set and the key has been removed from the ignition.

2nd Car Mode

This will be displayed while you are in 2nd Car mode. 2nd Car mode allows you to control another vehicle with the same system

installed in it. The remote needs to be coded to the other vehicle in 2nd Car mode for this feature to work.

(Not available on the 2WSHLCDR)

Vibration

This icon will be displayed if the remote is set to vibrate only. While the remote is set to vibrate only the remote will not beep, even

if the alarm is triggered. The remote will still vibrate in this mode.

Not

Available

2nd

a@iM

Remote LCD(liquid crystal display) Diagram and lcons

Shock Sensor Bypassed

This icon will be displayed when the shock sensor is bypassed by pressing buttons I+III for 2.5 sec. Impact to the vehicle will not be

detected at this time. This icon is always displayed on starter only systems because there is no shock sensor.

Voltage

This icon will be displayed while the remote is reporting the voltage of the vehicle or remote battery.

Temperature

This icon will be displayed while the remote is reporting the temperature of the vehicle.

Not

Available

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sin comentarios

CompuSTAR 1WAMR-Fiance Manual de usuario Pagina 9